To Next Page
J
Jay AllenSep 2, 2025
What to do if my Apex Digital Offroad Vehicle has no fuel in the fuel tank?
- HHeather BrownSep 2, 2025
If there is no fuel in the fuel tank of your Apex Digital Offroad Vehicle, ensure the fuel tank is filled with fuel.
What to do if my Apex Digital Offroad Vehicle has no fuel in the fuel tank?
If there is no fuel in the fuel tank of your Apex Digital Offroad Vehicle, ensure the fuel tank is filled with fuel.
How to fix an air cleaner that is dirty on my Apex Digital Pro MXR 90?
If the air cleaner on your Apex Digital Offroad Vehicle is dirty, clean or replace it.
How to fix a weak or intermittent spark in my Apex Digital Pro MXR 90 Offroad Vehicle?
If your Apex Digital Offroad Vehicle has a weak or intermittent spark, check the ignition system wires and replace any faulty components.
What to do if my Apex Digital Pro MXR 90 has brake drag?
If your Apex Digital Offroad Vehicle has brake drag, adjust the brake and/or replace worn parts.
How to fix a faulty spark plug in my Apex Digital Offroad Vehicle?
If you have a faulty spark plug in your Apex Digital Offroad Vehicle, replace it.
How to fix a dirty or clogged fuel filter in my Apex Digital Pro MXR 90 Offroad Vehicle?
To resolve a dirty or clogged fuel filter in your Apex Digital Offroad Vehicle, clean or replace the fuel filter.
What to do if my Apex Digital Pro MXR 90 Offroad Vehicle pulls to one side?
If your Apex Digital Offroad Vehicle is pulling to one side, check and correct the tie-rod adjustment and wheel alignment.
General| Brand | Apex Digital |
|---|---|
| Model | Pro MXR 90 |
| Category | Offroad Vehicle |
| Language | English |
Pre-ride procedures including securing parts and checking fluids/tensions.
Steps for breaking in the engine to ensure long-term performance and durability.
Routine checks and maintenance tasks to perform before each ride.
Step-by-step guide for taking apart and putting back together the clutch assembly.
Adjusting the carburetor and cleaning procedures for optimal fuel delivery.
Diagnosing problems like no fuel flow, weak spark, or low compression.
Addressing issues where the engine starts but dies, runs poorly, or has intermittent power.
