Need help?Do you have a question about the Apex Medical Serene and is the answer not in the manual?
Details compliance with medical device standards and EMC regulations.
Overview of the pump and mattress system components and their arrangement.
Identifies and labels the various parts of the pump unit, front and rear views.
Explains how to adjust air pressure for patient comfort and firmness.
Explains the different therapy modes: Static and Seat Inflate.
Instructions on powering the unit and locking the panel.
Explains the Max Firm mode for rapid inflation or patient support.
Instructions on how to temporarily suspend or mute alarms.
Details the low pressure indicator and its causes.
Describes the power failure alarm and how to disable it.
Explains the service alarm for filter inspection and reset.
Instructions for placing the mattress on the bed frame and securing it.
Guidance on mounting the pump unit to the bed rail.
Instructions for connecting the mattress air connector to the pump unit.
Steps for plugging in the power cord and managing excess length.
Details the necessary grounding procedures for safe operation.
Outlines the general procedure for operating the pump and mattress system.
Describes the procedure for quick air release from the mattress during CPR.
Information on the cover material and its recommended cleaning methods.
Procedures for wiping down and cleaning the mattress unit and its cover.
Steps for deflating the mattress for efficient storage.
Instructions for packing the system into the carrying bag.
General checks for the power cord, mattress cover, and air hoses.
Step-by-step guide for replacing a blown fuse in the pump unit.
Instructions for replacing or cleaning the air filter.
Details on checking and replacing the rechargeable battery.
Information regarding the expected service life and recommended servicing.
Solutions for when the device does not turn on.
Steps to resolve the low pressure alarm.
Checks to perform when the power failure alarm is active.
Adjustments for patient comfort if bottoming out occurs.
Checks for securing the mattress to the bed frame.
Information about the service light and filter inspection.
Technical details for the pump, including power, fuse, dimensions, and classification.
Specifies operating, storage, and shipping temperature, humidity, and altitude.
Technical details for the mattress, including model, dimensions, weight, and capacity.
Declarations regarding the device's electromagnetic emissions.
Declarations regarding the device's electromagnetic immunity.
Details immunity levels for electrical transients, bursts, surges, and voltage variations.
Details immunity to power frequency magnetic fields and conducted RF interference.
Details immunity to radiated radio frequency electromagnetic fields.
Guidance on maintaining safe distances from RF equipment.
General| Brand | Apex Medical |
|---|---|
| Model | Serene |
| Category | Medical Equipment |
| Language | English |
To Next Page