Need help?Do you have a question about the Apexis APM-J012-WS and is the answer not in the manual?
Lists the key technological features and capabilities of the IP camera.
Details all items included in the camera's product package.
Illustrates the physical components and design of the IP camera.
Details the components and their functions on the front panel of the camera.
Describes the ports and connections available on the rear and side of the camera.
Specifies the minimum hardware and operating system requirements for PC use.
Provides step-by-step instructions for setting up the camera hardware.
Guides users through the process of installing the necessary camera software.
Introduces the utility for finding, configuring, and managing IP cameras.
Lists the six available options when right-clicking in the IP Camera Tool.
Explains how to view device ID, firmware version, and web UI version.
Details how to configure network parameters like IP address for the camera.
Guides on upgrading the camera's system firmware and web UI.
How to manually refresh the list of detected IP cameras.
Procedure to resolve issues where IP is found but web page is inaccessible.
Information about the IP Camera Tool and ActiveX Control versions.
Instructions on how to access the camera via IP Camera Tool or browser.
Guide for accessing the camera using Internet Explorer with ActiveX.
Instructions for accessing the camera using non-IE browsers like Safari and Firefox.
Accessing the camera's interface and video feed via mobile devices.
Specifics and requirements for using ActiveX mode in IE browser.
Describes the limited access level and capabilities for visitor user accounts.
Describes the functions and permissions for the Operator user level.
How to configure the camera to view multiple devices simultaneously.
Adding multiple cameras connected to the local network for simultaneous viewing.
Configuring multi-device view via the internet using DDNS.
Instructions for upgrading the camera's firmware and web UI.
How to reset all camera settings back to their original factory defaults.
Instructions on how to restart the IP camera.
Overview of the different network configuration options available.
Configuring static IP address, subnet mask, and gateway for the camera.
How to connect the camera to a Wi-Fi network.
Configuring ADSL connection details, including username and password.
Enabling UPnP for automatic port forwarding, useful for DDNS.
Configuring Dynamic DNS settings for remote internet access.
Accessing general system configuration options for the camera.
Viewing camera's device ID, firmware, status, and network information.
How to assign a custom, user-friendly name to the camera.
Setting the camera's date, time, and timezone.
Managing user accounts (admin, operator, visitor) and their permissions.
Configuring the camera's status indicator light modes.
Backing up and restoring camera configuration settings.
Accessing additional functions like Motion Detection, Alarm, FTP, and Mail.
Configuring email alerts for events like motion detection.
Setting up FTP for uploading images or video clips upon motion detection.
Configuring alarm triggers such as motion detection.
Enabling motion detection and setting its sensitivity level.
Adjusting the sensitivity level for motion detection events.
Connecting external alarm devices and configuring IO linkage.
Details on using IO pins for alarm inputs and outputs.
Configuring email notifications with attached images upon alarm.
Setting a schedule for when the camera should be active or trigger alarms.
Setting the save location for recorded video files.
Accessing the camera via non-IE browsers using Server Push mode.
Accessing the camera's interface and video feed via mobile phone.
Common questions and troubleshooting tips for camera operation.
How to reset administrator username and password to factory defaults.
Troubleshooting errors related to subnet mismatches in network configuration.
Steps to check and configure IP address and subnet for camera connectivity.
Reasons and solutions for not being able to access the camera remotely.
Troubleshooting steps if the IP Camera Tool cannot detect the camera.
Troubleshooting common issues with UPnP port forwarding.
Resolving missing desktop shortcut issues in Windows 7/Vista.
Troubleshooting problems changing record path settings in Windows 7/Vista.
Explains limitations of certain features in browsers other than IE.
Troubleshooting common issues preventing the camera from connecting wirelessly.
Resolving issues when viewing multiple cameras remotely.
Troubleshooting black screens or garbled code during remote login.
Troubleshooting missing images or display problems related to ActiveX.
Factors affecting image frame rate and overall camera performance.
Guide to registering for a Dynamic DNS (DDNS) account.
Explains prompts related to multiple camera connections and status.
Lists default network settings and user credentials for the camera.
To Next Page
General
