9
Repair Information
10
Hazardous Location Wiring
8
General Care
Your ultrasonic sensor is very low maintenance and will need little care as long as it was installed
correctly. However, in general, you should periodically inspect your DST sensor to ensure the
sensor face is free of any buildup that might impede the function of the sensor. If sediment or other
foreign matter becomes trapped on the sensor face, detection errors can occur.
If you need to remove the sensor, be sure to store it in a dry place at a temperature between -40°
and 180° F.
If your DST ultrasonic sensor needs repair, contact us via email, phone, or online chat on our
website. We will issue you an RMA number with instructions.
• Phone: 888-525-7300
• Email: sales@apgsensors.com
• Online chat at www.apgsensors.com
To Previous Page
Loading...
Need help?
General