Need help?Do you have a question about the API 8200A and is the answer not in the manual?
Explains connecting the L100 PSU to the 8200 for power distribution via a cable loop.
Details connecting the separate L100 PSU to the 8200A for power distribution.
Provides detailed pinout information for the 8200's expansion bus connector.
Explains the balanced INSERT RETURN connector for external processing or switchable inputs.
Details the INSERT SEND as a multed parallel output from the balanced input connector.
Explains the balanced input, its muting behavior when insert is active, and its source.
Explains the balanced INSERT RETURN connector for external processing or switchable inputs.
Identifies the DIRECT OUTPUT as an output from level control wipers for recorders or single devices.
Illustrates pinouts for RIGHT OUT, LEFT OUT (XLR), and MALE POWER CONNECTOR.
Details the pinout for the 8200's 8 balanced input connectors, including shield and audio connections.
Provides the pinout for the 8200's 8 balanced insert send connectors, detailing output and shield.
Shows the pinout for the 8200's 8 balanced insert return connectors, including input and shield.
Lists the pinout for the 8200's 8 unbalanced direct output connectors.
Details the pinout for balanced send/bus outputs including stereo, sends, solo, and bus connections.
General| Brand | API |
|---|---|
| Model | 8200A |
| Category | Music Mixer |
| Language | English |
To Next Page
