Need help?Do you have a question about the Apogee DAX 3 and is the answer not in the manual?
General| Manufacturer | Apogee |
|---|---|
| Model | DAX 3 |
| Frequency Response | 20 Hz to 20 kHz |
| Input Impedance | 10 kOhms |
| Output Impedance | 100 Ohms |
| Power Supply | 120V/240V AC, 50/60Hz |
| Channels | 2 |
Crucial safety instruction to disconnect all power and cables before making adjustments.
Emphasizes concurrent changes for both left and right channel output boards.
Critical safety warning to disconnect power before performing any wiring changes.
Instructions for modifying the Diva loudspeaker's passive crossover for DAX 3 use.
Recommends professional installation for users not comfortable with mechanical modifications.
Detailed steps for modifying the woofer wiring on the Diva passive crossover.
Specifies the correct wiring pinout for DAX XLR connectors (Common, Negative, Positive).
Emphasizes avoiding electrical shock by not removing the power supply cover when plugged in.
To Next Page