Choosing Duet for Mac Sound I/O
After connecting Duet, installing the software and restarting your Mac, a dialog box will prompt you to choose Duet
for Mac sound input and output. Click Yes.
Connect to Headphones or Speakers
Connect headphones to the headphone output on the front of the unit.
Connect the provided breakout cable to I/O Breakout Port on the rear of the unit. Then connect Duet’s 1/4” speaker
outputs 1-2 to the inputs of your active (powered) studio monitors or amplifier.
Connecting to your Mac - Apogee Duet Quick Start Guide
12