6
Connecting to Windows
Install the Driver
Driver software is required for Groove to work on computers running the
Windows operating system. See your Groove box for system requirements.
To download the Windows driver, register Groove on the Apogee website:
www.apogeedigital.com/register/
1. Log into your Support Account
2. Register Groove. In the “My Registered Products” page, click the Download
Driver link and save the le
3. Unzip the download and run the Apogee_DriverSetup le inside
Follow the prompts to complete installation
• NOTE: If a prompt appears asking for permission to make changes to the computer, click “Yes”.
To Next Page
Loading...