Apogee LSDS-16 - Technical Information; Laser Transmitter; Laser Receiver; Control Panel

To Next Page

To Previous Page

1. Technical information

 Bucket Scraper: Equipment attached behind tractor that carries soil

with it.

 Laser Transmitter: Rotary Laser beam is emitted out of this device

which creates a laser field.

 Laser Receiver: It detects the laser beam and follows it for levelling

 Control Panel: It allows driver/operator to control the functionality

and movement of machine.

 Power Cable: It connects battery with the control panel through a 2

pin connector.

 Receiver Cable: Having 4 pin connector on both ends, it connects

Receiver and control panel

 Valve Cable: Having 3 pin connector on one side, it connects

Hydraulic Valve with Control panel.

 Hydraulic Valve: Directional Valve that controls the bucket

movement.

 Hydraulic Cylinder: Dual acting piston hydraulic cylinder executes

the motion.

Pre Installation Checks:

 Get the tractor serviced and confirm that everything is working fine.

 There must be sufficient hydraulic oil in the tractor.