Apollo AIR PRO - Charging Procedure; Connecting and Monitoring Charge; Battery Charging Best Practices

23
Charging procedure
Before connecting the battery charger to the
electric scooter, make sure that the scooter is
stationary, that the motor is not running and
that the charger connector (visible on the
picture on the right) is dry.
IMPORTANT! Connect the charger to
the scooter’s charger connector. Plug the
charger into a standard power socket. The
red LED light comes on to indicate that the
battery is charging, when the LED light turns
green, charging is complete. You can then
unplug the charger.
The protective cap is used to protect the
connector pins from water. Be sure to put the
cap back on aer each charge and before
each use.
IMPORTANT! Leaving the unit charging
for too long may shorten the battery life. Do
not leave your Apollo Air scooter plugged
into the charger overnight. Make sure to
charge your Apollo Air battery to 100% at the
first charge and at each charge thereaer in
order to prolong its lifespan.