Appareo Systems Vision 1000 User Manual

Mar 16/18
ENSTROM 480B OPERATOR’S MANUAL
AND
FAA APPROVED
ROTORCRAFT FLIGHT MANUAL
SUPPLEMENT
APPAREO SYSTEMS VISION 1000
* * * * *
REPORT NO. 28-AC-067
* * * * *
HELICOPTER SERIAL NO.
HELICOPTER REGISTRATION NO.
THIS SUPPLEMENT MUST BE CARRIED IN THE
HELICOPTER AT ALL TIMES IF EQUIPPED WITH THE
APPAREO SYSTEMS VISION 1000. CHAPTERS 1, 2, 3,
AND 4 ARE FAA APPROVED.
FAA APPROVED
MANAGER, SOUTHWEST FLIGHT TEST SECTION, AIR-713
FEDERAL AVIATION ADMINISTRATION
FT. WORTH, TX
DATE
The Enstrom Helicopter Corporation
2209 22
nd
Street
Menominee, MI 49858, USA
www.enstromhelicopter.com
This electronic document is not linked to a subscription for revision control or distribution. Refer to the Optional Equipment
Supplement Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision
level of this Rotorcraft Flight Manual Supplement.
UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED

Appareo Systems Vision 1000 Specifications

General

Logging	Yes
Power Supply	9-36 VDC
Connectivity	USB
Video Recording	Yes, up to 720p
Memory	Internal
Data Storage	Up to 8 GB
Communication	RS-232

Summary

Appareo Vision 1000 Supplement Introduction

Supplement Purpose and Content

Provides an overview of the Vision 1000 supplement's content and its requirement for helicopter installation.

Appareo Systems Contact Information

Lists contact details for Appareo Systems, including address, phone number, and website.

Definition of Abbreviations

Lists and defines abbreviations used throughout this supplement, referencing Table Intro-1.

Chapter 1: Operating Limitations

General Limitations Reference

States that all operational limits should be referred to in the basic RFM.

Chapter 2: Normal Procedures

General Normal Procedures and LED Status

Details normal operation, including LED indicator status during startup and fault detection.

SD Card and GPS Status Indicators

Explains LED behavior for SD card issues, GPS signal lock, and data recording status.

Chapter 3: Emergency Procedures

General Emergency Procedures Reference

Instructs users to consult the basic RFM for all emergency procedures.

Chapter 4: Performance Data

General Performance Data Reference

Directs users to the basic RFM for all performance data.

Chapter 6: Weight/Balance and Loading

General Weight/Balance/Loading Reference

Instructs users to refer to the basic RFM for weight, balance, and loading information.

Chapter 7: System Description and Operation

System Description and Components

Details the Vision 1000 installation, primary components, data gathering capabilities, and power protection.

System Operation and Configuration

Covers Vision 1000 operation, reconfiguring, memory card insertion, and data retrieval procedures.