Tools
Use the following tools for procedures in this chapter:
• Coin the size of a U.S. quarter (to remove battery door)
• 5 mm nut driver
• 4 mm nut driver (to remove sound board on iBook)
• Torx T8 screwdriver
• #0 Phillips screwdriver (for optical drive bezel screws)
• #1 Phillips screwdriver
• Very small jeweler’s flat-head screwdriver (for
keyboard locking screw)
• Flat-blade tool, ESD-safe, non-marring
(such as the nylon probe tool 922-5065)
• I C extractor (to remove display cable connector)
• Fine point needle nose pliers (to adjust handle tension)
To Next Page
Loading...
