Cables
Follow these guidelines when working with cables:
• Ensure that all cables are routed exactly as they were
found when reassembling. Use all grooves and/or
protrusions to align cabling. If the cable is improperly
routed, you may not be able to reassemble the computer,
or once reassembled, the computer may fail to function.
• Check that all cables are properly aligned in the
connectors and that the connections are tight.
• Handle flex cables carefully. Using excessive force to
disconnect a cable can tear or damage it so it will not
work properly.
• Use a nylon tool or dental pick to help loosen cable
connections.
To Next Page
Loading...
