Swipe down from the top with two fingers to speak the screen (if you have Speak Screen
turned on)
On iPhone 6s and iPhone 6s Plus, replicate 3D Touch to preview the contents of an
email message
Item scanning
Item scanning alternately highlights each item or group of items on the entire screen until
you trigger your Select Item switch. If there are many items, Switch Control highlights them
in groups. When you select a group, highlighting continues with the items in the group. When
you select a unique item, scanning stops and the control menu appears. Item scanning is
the default when you first turn on Switch Control.
You can choose from three scanning styles—auto scanning, manual scanning, and single-
switch step scanning. Auto scanning automatically highlights items, one after the other.
With manual scanning, you use one switch to highlight an item and another to activate it.
Single-switch step scanning uses a switch to move the highlight from item to item. If you
take no action after a period of time, the highlighted item activates.
Select an item or enter a group. Watch (or listen) as items are highlighted. When the item
you want to control (or the group containing the item) is highlighted, trigger your Select Item
switch. Work your way down in the hierarchy of items until you select the individual item you
want to control.
Back out of a group. Trigger your Select Item switch when the dashed highlight around the
group or item appears.
Dismiss the control menu without performing an action. Trigger your Select Item switch
when the item itself is highlighted. Or choose Escape from the control menu.
Hear the names of items as they are highlighted. Go to Settings > General >
Accessibility > Switch Control, then turn on Speech. Or choose Settings from the control
menu, then choose Speech On.
Slow down or speed up the scanning. Go to Settings > General > Accessibility > Switch
Control > Auto Scanning Time.
Point scanning
To Next Page
Loading...
