14 -
Testing Procedures
iPod mini
IRAM Test
1. The IRAM test runs automatically when you enter the built-in diagnostics, and its
results screen is displayed (shown below).
2. If the test passes, the message IRAMPASS will be displayed.
3. Press Play to continue.
4. Two “zeets” will be heard, and the first of three menu screens of tests will be displayed
(all three screens, in order, shown here).
IRAMPASS
HITPLAY
CONTINUE
5 IN 1
RESET
KEY
CHGRCUR
REMOTE
HP STAT
IRAM3
BATT A2D
A2D STAT
FIREWIRE
HDD R / W
SMRT DAT
SMRT SCAN
CLR BLKS
DISKMODE
WHEEL
CONTRAST
AUDIO
STATUS
DRV TEMP
To Next Page
Loading...
