Appendix C Connecting to the Internet 87
PPPoE Connections
If you are unable to connect to your Internet service provider using PPPoE, make sure
you have the correct information entered in Network preferences.
Check System Preferences settings:
1 Choose Apple () > System Preferences.
2 Click Network.
3 Choose Network Port Configurations from the Show pop-up menu.
4 Drag Built-in Ethernet to the top of the Port Configurations list.
5 Choose Built-in Ethernet from the Show pop-up menu.
6 Click PPPoE.
7 Select “Connect using PPPoE.”
8 Check the Account Name field to be sure you have entered the correct information
from your ISP.
9 Retype your password if you chose to save your password, to be sure it is correct.
10 Click TCP/IP. Make sure you’ve entered the correct information from your ISP
in this pane.
11 Click Apply Now.
LL3734M40.book Page 87 Thursday, July 6, 2006 3:45 PM
To Next Page
Loading...