073-1311 Rev. A 7
© 2009 Apple Inc. All rights reserved.
Make sure power adapter is connected and plugged in.2.
Insert the Mac OS X Install DVD that came with your computer. 3.
Double-click Install Mac OS X. 4.
Follow the onscreen instructions.5.
Note: To restore Mac OS X on your computer to the original factory settings, click Options
in the “Select a Destination” pane of the Installer, and then select “Erase and Install.” If you
choose “Erase and Install,” you will see a message reminding you to use the Applications
Install DVD to reinstall the bundled applications that came with your computer.
When the installation is complete, click Restart.6.
Follow the prompts in the Setup Assistant to set up the user account. 7.
Installing Applications
If you reinstall Mac OS X on your computer and select the “Erase and Install” option, you must
reinstall the applications that came with your computer, such as the iLife applications.
To install applications that came with the computer, follow these steps:
Make sure power adapter is connected and plugged in.1.
Insert the Applications Install DVD that came with the computer. 2.
Double-click Install Bundled Software. 3.
Follow the onscreen instructions. 4.
When the installation is complete, click Close. 5.
Apple Inc.
© 2009 Apple Inc. All rights reserved.
Under the copyright laws, this document may not be copied, in whole or in part, without the
written consent of Apple.
Every eort has been made to ensure that the information in this document is accurate. Apple is
not responsible for printing or clerical errors.
Apple
1 Innite Loop
Cupertino, CA 95014-2084
USA
+ 1 408 996 1010
http://www.apple.com
Apple, the Apple logo, Mac, Macintosh, and MacBook are trademarks of Apple Inc., registered in
the U.S. and other countries.