Apple PowerBook - Page 56

KeyboardTake Apart
PowerBook (FireWire)
7
4. Flip the keyboard over
and lay it on top of the
palm rests and
trackpad.
5. Grasp the keyboard
cable as close as
possible to the
connector and pull up
to disconnect the
keyboard from the I/O
logic board. Rock the
cable carefully if
additional leverage is
needed.
Replacement Note:
Position the cable over the
connector and pull the
keyboard slightly to the
right so the cable is not
bent. Hold the cable as
close as possible to the
connector and press
straight down. Use the end
of a nylon tool to press the
cable firmly into the
connector.