Apple PowerBook - Page 77

Top CaseTake Apart
PowerBook (FireWire)
28
2. Remove the three long,
silver T-8 screws
under the clutch cover.
3. Remove the black T-8
screw under the clutch
cover near the power
key.
Replacement Note:
Do not
replace the second black
T-8 screw on the left at
this stage. It is installed
when the display module is
replaced.
4. Remove the black T-8
screw on the far right
of the stiffener near
the expansion bay door.
5. Slide the black mylar
EMI shield out from
under the palmrest and
pull it back