Apple PowerBook - Page 93

Display HousingTake Apart
PowerBook (FireWire)
44
Display Housing
Before you begin, follow
the procedures to remove
the display module from
the bottom case.
1. Use an X-Acto knife or
razor blade to pry up
the two mylar screw
covers at the bottom of
the display bezel.
2. Use the pointed end of a
nylon tool to pry the
four display bumpers
from their recesses.
Note: The adhesive on the
backs of the screw covers
and bumpers must be kept
clean or they will not
adhere properly when
reapplied. Use new parts if
those you removed are
damaged or dirty.