Connecting your GeoPort Telecom
Adapter
To connect your Macintosh to your telephone line, plug one
end of the GeoPort Telecom Adapter into your Macintosh
and the other end into your telephone wall socket and
telephone.
Connecting the adapter to your computer
To connect the adapter to your computer
1 Locate the modem port at the back of your computer.
The modem port is marked with the W icon.
2 Plug the adapter’s cable into your computer’s modem port,
as illustrated below.
Modem port located on
the back of the computer
5
Installing Your Hardware
To Next Page
Loading...