Q: I archived some fax documents from the “Sent Fax
Documents” and “Received Fax Documents” folders. When I
put them back, some of them did not appear in the Apple
Fax lists.
Sent and received fax documents are different file types. If
you put a received fax into the “Sent Fax Documents” folder,
for example, it does not show up in the list. Be sure to
archive sent and received faxes separately.
Q: When I try to open Apple Fax or my communications
program, I get a message that says there is not enough
memory.
1 Quit any programs that you are not currently using.
2 Close any windows that you don’t need open.
3 If you are using Express Modem software, try turning off the
modem in the Express Modem control panel. It may be
loaded into memory in such a way that the largest free block
is not big enough, but the total of available blocks is. Turning
off the modem frees up approximately 600K of memory.
When a program like Apple Fax needs the modem, it will
turn it on again automatically. Of course, you should not
turn off the modem while using it for a voice, fax, or data
connection.
66
Appendix B
To Next Page
Loading...