EasyManuals Logo

Apple Thunderbolt Display User Manual

Apple Thunderbolt Display
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13English
Follow these safety guidelines for using your display:
 The only way to completely disconnect power is to unplug the power cord. Be sure to
pull the plug, not the cord.
 Disconnect power immediately if the power cord is frayed or damaged, if you spill
something on the display, or if the display falls or is damaged in some other way.
WARNING: Use only the power cord that came with your display. The power cord has
a three-wire grounding plug (a plug that has a third grounding pin) that ts only a
grounded AC outlet. If you are unable to insert the plug into an outlet because the
outlet is not grounded, contact a licensed electrician to replace the outlet with a
properly grounded outlet.
WARNING: Your display is a high-voltage component and should not be opened for
any reason, even when it’s unplugged. If your display needs service, see “Learning
More, Service, and Support on page 16.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Apple Thunderbolt Display and is the answer not in the manual?

Apple Thunderbolt Display Specifications

General IconGeneral
3DNo
Panel typeTFT
Aspect ratio16:9
Response time12 ms
Display diagonal27 \
Display technologyLCD
Contrast ratio (dynamic)-
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Display brightness (typical)375 cd/m²
Supported graphics resolutions2560 x 1440
Built-in subwooferYes
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports1
Minimum system requirementsMacBook Air / MacBook Pro / Mac mini / Mac Pro / iMac
USB hub version2.0
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity3
Number of speakers2
Product colorBlack, Silver
Mac operating systems supportedMac OS X 10.6 Snow Leopard
Cable lock slot typeKensington
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2 W
Power consumption (typical)250 W
Operating altitude0 - 3000 m
Storage temperature (T-T)-40 - 47 °C
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)207 mm
Width (without stand)650 mm
Height (without stand)491 mm
Weight (without stand)10800 g

Related product manuals