Apple Thunderbolt Display User Manual

6 English
Setting Up Your Display
Follow these steps to set up your Apple Thunderbolt Display:
1 Remove the protective lm from the display and cables.
2 Insert the power cord into the display, and then insert the AC plug into a grounded
power outlet.
3 Connect the Thunderbolt cable to your computer’s Thunderbolt port.
Apple Thunderbolt Display
MacBook Pro
MagSafe
power port
Grounded
power outlet
Thunderbolt
port
4 If you’re connecting to a MacBook Pro, plug the MagSafe connector into the MagSafe
power port on your MacBook Pro to power it and charge its battery.
5 If your computer is turned o, press the power (®) button on your computer to start it
up. The display turns on automatically when you start up your computer.

Apple Thunderbolt Display Specifications

General

3D	No
Panel type	TFT
Aspect ratio	16:9
Response time	12 ms
Display diagonal	27 \
Display technology	LCD
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Display brightness (typical)	375 cd/m²
Supported graphics resolutions	2560 x 1440
Built-in subwoofer	Yes
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	1
Minimum system requirements	MacBook Air / MacBook Pro / Mac mini / Mac Pro / iMac
USB hub version	2.0
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	3
Number of speakers	2
Product color	Black, Silver
Mac operating systems supported	Mac OS X 10.6 Snow Leopard
Cable lock slot type	Kensington
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	2 W
Power consumption (typical)	250 W
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-40 - 47 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC

Weight and Dimensions

Depth (without stand)	207 mm
Width (without stand)	650 mm
Height (without stand)	491 mm
Weight (without stand)	10800 g