Applied Precision WS 2320 - Page 48

Working Standard
User’s Guide
WS-UGFW619-EN www.appliedp.com
48
Control keys:
F3 .............. Transformer test
F4 ............. Save Load Point values (including harmonics and shapes) into results database
F5 .............. Menu
4.12 Menu
Menu enables access to settings, database, information about device and device calibration.
It can be activated by key F5.
Menu screen
* P11
Content:
1. Measurement settings (F1 or 1)
2. Tests settings (F2 or 2)
3. System settings (F3 or 3)
4. Database of meters and results (F4 or 4)
5. Information about device and connected accessories
(F5 or 5)
6. Tests and Calibration (6)
Control keys:
F1 – F5 or 1 – 6 ....... Menu item selection
▼▲ ........................... Navigation on screen
OK ........................... Confirmation of selected item
ESC ......................... Exit (return to previous page)