Apprentice AJS40 - Selecting the Orbital Cutting Action; Installing or Removing Saw Blade

11
English
Workpiece being cut Adjusting dial number
Wood 4 – 6
Mild Steel 3 – 6
Stainless Steel 3 – 4
Aluminum 3 – 6
Plastics 1 – 4
The speed adjusting dial can be turned only as far as 6 and back to 1. Do not
force it past 6 or 1, doing so may cause the speed adjusting function to no
longer function properly.
SELECTING THE ORBITAL CUTTING ACTION:








Position Cutting Action Applications
0 Straight-line For clean cuts in wood and plywood. For
cutting mild steel, stainless steel, and plastics.
I Small orbit For cutting mild steel, aluminum, and hard wood.
II Medium orbit For cutting wood and plywood.
III Large orbit For fast, aggressive cutting in wood and plywood.
INSTALLING OR REMOVING SAW BLADE:
CAUTION:





To install the blade:









