Need help?Do you have a question about the Apricus APHP-R290-260 and is the answer not in the manual?
Guidance on choosing the right outdoor location for the heat pump unit.
Instructions for preparing a stable and level base for unit installation.
Requirements for electrical circuit protection and wiring the unit.
Steps to safely power on and initialize the heat pump system.
Details of standards and approvals the product has been tested against.
Important safety warnings and precautions for operating the appliance.
Identification of the main components of the heat pump system.
Detailed technical specifications of the air source heat pump.
Details about the integrated storage tank, its material, and features.
Overview of the smart controller's features, including Wi-Fi and monitoring.
Explanation of the system's operational principles.
Guidelines for proper storage and transportation of the heat pump unit.
Requirements for unit placement, clearances, and airflow for optimal operation.
Specifications for the support base, including dimensions, material, and stability.
Details on connecting the water inlet/outlet, drainage, and safety relief valve.
Procedure for filling the tank and removing air pockets for proper operation.
Requirements for electrical connections, circuit protection, and earthing.
Overview of controller functions and operational modes.
Instructions for setting water temperature, clock, brightness, and querying data.
Instructions for pairing and using the mobile app for system monitoring and control.
Essential checks after plumbing and electrical connections are completed.
Steps to connect the system to Wi-Fi and the mobile app.
List of fault codes and their possible causes and solutions.
Guidance on addressing common operational issues like cold water or leakage.
Routine checks and anode maintenance recommendations for tank longevity.
Details on warranty duration, coverage, and eligibility requirements.
Procedure for registering the system and lodging a warranty claim.
General| Model | APHP-R290-260 |
|---|---|
| Heating Capacity | 26kW |
| Operating Temperature Range (Heating) | -25°C to 43°C |
| Refrigerant | R290 |
| Power Supply | 400V, 3Ph, 50Hz |
| Type | Air Source Heat Pump |
To Next Page