Model 76 Dehumidifier Control
Installation Instructions
READ AND SAVE THESE INSTRUCTIONS
CAUTION
1. Read all instructions before beginning installation.
2. Do not use in pool applications. Pool chemicals can damage the control.
3. Do not use solvents or cleaners on or near the display and circuit board.
Chemicals can damage components.
WARNING
1. Improper installation may cause property damage or injury. Installation, service,
and maintenance must be performed by a qualified service technician.
2. 120 Volts may cause serious injury from electric shock. Disconnect electrical
power before starting installation or servicing. Leave power disconnected until
installation/service is completed. This control is not a 120 Volt (line voltage)
device.
SAFETY INSTRUCTIONS
The Model 76 is for use with any dehumidifier as an EXTERNAL CONTROL,
including Aprilaire Models 1710A, 1730A, 1750A, 1770A, 1830, 1850 & 1870.
The Model 76 can also be used as a communicating REMOTE CONTROL
with Aprilaire Models 1710A, 1750A, 1770A, 1830, 1850 & 1870.
(See OVERVIEW on page 3 for details.)
1
To Next Page
Need help?
General
