What to do if none of the lights work on my APRILIA Motorcycle?
If none of the lights are working on your APRILIA Motorcycle, check the high/low beam selectors, the voltage regulator, and the generator.
What to do if a light doesn’t work on my APRILIA Motorcycle?
If a light doesn’t work on your APRILIA Motorcycle, start by checking the bulb. If the bulb is fine, check for voltage on the bulb holder terminals and inspect the wiring connections.
Why do the bulbs burn out frequently on my APRILIA Motorcycle?
Bulbs may burn out frequently on your APRILIA Motorcycle due to excessive vibration on the lights, so check for this and ensure none of the lights are touching parts of the motorcycle without flexible mountings. Also, check the wiring connections and the voltage regulator.
What to do if the temperature reading is too high on my APRILIA Motorcycle?
If the temperature reading is too high on your APRILIA Motorcycle, you should check the cooling circuit and the connections. Also, inspect the coolant thermistor and the coolant temperature gauge.
What to do if the temperature reading is too low on my APRILIA Motorcycle?
If the temperature reading is too low on your APRILIA Motorcycle, check the connections and ensure the green/red wire on the sensor is supplied with power. Additionally, inspect the coolant thermistor and the coolant temperature gauge.
General| Transmission | 6-speed |
|---|---|
| Rear Suspension | Single shock absorber |
| Rear Tire | 130/70-17 |
| Engine Type | Single-cylinder, two-stroke |
| Cooling System | Liquid-cooled |
| Fuel System | Carburetor |
| Frame | Aluminum perimeter frame |
| Front Suspension | Upside-down fork |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Fuel Capacity | 13 liters |
To Next Page
