•
Remove the washers (6), the spacers
(7) the rubber blocks (8) and the wash-
ers (9).
Headlight assy.
To remove the headlight unit, first remove the side
fairings, the internal covers, and the internal fair-
ings. Then proceed as described:
•
Remove the two screws (1) fastening
the lower front closure (2).
•
Remove the two screws from the lower
front closure (2).
•
Remove the nuts (3) fastening the rear-
view mirrors.
Bodywork RS 660 - Tuono 660
BODYW - 388