Aprimatic T1B - Safety Recommendations; Purpose of the Manual; Application Range

3
ENGLISH
Aprimatic S.p.A. • Zona Industriale Fossatone
40060 Villa Fontana • Medicina • Bologna (ITALY)
tel. +39-051.6979511 • fax +39-051.6930396
Safety recommendations
• The manufacturer’s instructions must be strictly observed.
• The installer must check that the device is operating correctly.
• Do NOT use the product incorrectly or for purposes not envisaged.
• Do NOT tamper with or modify the product.
• Refer to the manual for the device to be programmed for the safety standards to be
adopted during installation.
Purpose of the manual
This manual has been drawn up by the manufacturer and is an integral part of the
product.
The information contained in this manual is for expert operators who install the product
and carry out extraordinary maintenance. They must have specific skills to carry out the
operations correctly and in complete safety. Constant observance of the information in
this manual guarantees the safety of persons, low running costs and a longer life for the
product. To prevent incorrect use and the consequent risk of accidents, read this manually
thoroughly and carefully and follow the instructions in full.
Application range
Programmer for Aprimatic electronic devices.
Contents
1. Description .................................................................................................. 4
1.1 Keys and display ................................................................................... 4
2. User instructions ......................................................................................... 4
2.1 Card connection procedure ................................................................... 4
2.2 Parameter/function setting procedure.................................................... 4
3. Programming tables .................................................................................... 4
Functions table ........................................................................................... 4
General programming table ......................................................................... 5