To Next PageTo Next Page
Need help?Do you have a question about the Aprimatic UNICO RR-SE and is the answer not in the manual?
General| Frequency | 433.92 MHz |
|---|---|
| Number of channels | 2 |
| Output Type | Relay |
| Operating Temperature | -20°C to +55°C |
| Modulation | ASK |
Defines the scope and permitted use of the Aprimatic receiver module within Europe.
Outlines essential safety practices for installation and operation, including qualified personnel and power disconnection.
Details the receiver unit, its connectors, jumpers, RF module, and terminal boards, including technical features and assembly.
Explains the function, insertion, and capacity of the removable memory module for storing remote control data.
Details how to configure the receiver using jumpers for channel selection, button row selection, and output functioning logic.
Explains how the receiver performs an automatic memory test upon power-up, indicated by buzzer beeps representing free memory percentage.
Provides step-by-step instructions to erase all stored remote control data using the delete button.
Guides users through the process of programming the first remote control by pressing buttons simultaneously until confirmation.
Describes how to add additional remote controls after the first one has been successfully programmed.
Details how to remove a specific remote control from the receiver's memory by pressing the delete button and a remote button.
Explains the procedure to enable the receiver to learn identification data from cloned or imitation remote controls using the JPCL jumper.
Describes the default safety mode using a unique serial number and rolling code for secure access control.
