To Next PageTo Next Page
Need help?Do you have a question about the Aprimatic UNICO and is the answer not in the manual?
Defines the scope and intended use of the Aprimatic receiver module.
Lists essential safety precautions for installation and operation of the equipment.
Details the main receiver unit and its key components like J1, JP9, BZL, D1, DLL, RF module, CON1, CON2.
Explains the wiring and terminal connections for the receiver unit, including earthing, aerial, power, and monitoring terminals.
Describes how to configure the receiver settings using jumpers for output channel and button selection.
Explains how to use jumpers JP3 and JP4 to select button rows for 14-button remote controls.
Details the selection of output modes (pulse, step, continuous) for channels 3 and 4 using jumpers JP1 and JP2.
Lists optional accessories like CA41, CA43 modules, memory expansion, external containers, and programming tools.
Explains how the receiver tests memory availability and indicates free memory via buzzer beeps.
Provides a step-by-step procedure to erase all stored remote control data from the receiver's memory.
Guides on how to program the first remote control into the receiver's memory.
Details the process for adding additional remote controls after the first one has been programmed.
Outlines the procedure to remove a specific remote control from the receiver's memory.
Describes the default programmed mode, its security features (hopping rolling code), and its application.
General