Apro BON-II Series - User Manual

Product Specification
APRO RUGGED METAL 2.5” SATA III MLC SSD
SUPPORTS FAST / SECURE ERASE
Version 01V1
Document No. 100-xR2SRBON-JHTM
April 2015
APRO CO., LTD.
Phone: +88628226-1539
Fax: +88628226-1389
2.5” SATA III MLC SSD
Supports Fast & Secure Erase
BON-II Series

Summary

Introduction

System Features

Flash Management Technology - Static Wear Leveling

Power Interrupt Data Protection Technology

Details the technology protecting data during power loss events.

Product Specifications

System Environmental Specifications

System Power Requirements

System Performance

Provides sequential read/write speeds and access times for various capacities.

System Reliability

Covers wear-leveling algorithms, ECC technology, endurance, and data retention.

Interface Description

APRO Rugged Metal 2.5” SATA III MLC SSD Interface

Pin Assignments

Configuration of BON-II Series 2.5 SATA III MLC SSD

Fast;Secure Erase Jumper

Explains the jumper settings for enabling Fast Erase and Secure Erase functions.

Write Protect Function

Details how to enable the write-protect feature using a hardware jumper.

Secure Erase

Describes the jumper setting for activating Secure Erase and available standards.

Software Commands

Write Protect

Fast Erase

Explains the software commands used to initiate the Fast Erase function.

Apro BON-II Series Specifications

General

Series	BON-II Series
Interface	SATA 6Gb/s
Operating Temperature	0°C to 60°C
Non-Operating Temperature	-40°C to 70°C
MTBF	1, 000, 000 hours
Warranty	3 years