smart
RSD-D Quick Installation Guide
Step1. Buckle RSD-D onto the PV module frame.
A.Back buckle
B.Front buckle
Step 2. Connect the INPUT1 connectors of the RSD-D to the first PV module junction box
and connect the INPUT2 connectors to second PV module, the device DC output voltage
is within the range of 1.2 ~ 2v.
NOTE: Do not short-circuit the RSD-D output connectors, otherwise it will be damaged.
2021/08/06 Rev2.5 | Quick Installation Guide1
Mounting brackets
INPUT2+ INPUT1+
OUTPUT- OUTPUT+
INPUT2- INPUT1-
To Next Page
