6) Configure time-zone
Click “Administration”, then “Date, Time, Time-zone”.
7) Step 6: Select grid profile
Click “Grid Profile”, then select “Grid profile”.
NOTE: If you select the wrong grid profile, the inverters will not work normally.
Option 2：
1）Click "Home" at the bottom of the page. The information about systems info of
ECU-C,ECU-C ID, version , total number of inverters, the number of connected
inverters, intraday power output, historical Power output and current system power
shall be displayed.
2
）
Click "Settings", select "ID Management", input the UID manually or scan the
UID by camera. If there is no need to modify, then click "SYNC" to update the UIDs
onto ECU.
3
）
Real Time Data
This page shall display the added inverter. According to different models of inverter,
each inverter would have the corresponding modules displaying the real time
power.Click "Module", the detailed information of the inverter shall be displayed,
including inverter ID, PV module power, grid voltage, frequency and temperature.
4
）
Grid Profile
User needs to select grid profile when installing the system.
To Previous Page
Loading...
