１１
6. Cleaning & Maintenance
6.1 Cleaning after use & Cleaning after dust cup is full: When the dust cup is full, keep the vacuum
cleaner above the dust bin. Push the dust release key (NO.1) with your fingers to make the dust cup
cover (NO.2) rotate downward, and the dust in the dust cup will fall into the dust bin, as shown in
Figures 6-1 and 6-2. Then pull the dust cup release button (NO.3) to remove the dust cup from the
main unit, as shown in Figure 6-3.
Attention: When the HEPA filter and dust cup is moved out, OLED (NO.4) will show as Figure
6-4, and the appliance cannot operate.
To Next Page
Loading...