APT 31883 - Page 7

７
4.2 Main Unit Operation
Press release key (NO.1) to disassemble aluminum tube and main unit, see Figure 4-5. Press the
button (NO.2) to power on for cleaning furniture, bed or wall, and press the speed control button
(NO.3) to switch gear as the initial default setting is AUTO gear, see Figure 4-6. Press again the
power switch (NO.2) if you want it to stop. Please be advised that OLED (NO.4) displays battery
capacity 100% if fully charged. When the battery power is low, it shows relative percentage. And
when it shows 0%, the cleaner will stop later.
4.3 Battery Disassemble Operation
Please hold on the main unit with one hand, press the release key (NO.1) with another hand and pull
out the battery pack at the same time to release it. See Figure 4-8.
Figure 4-6
Figure 4-7
2
4
3
Figure 4-5
Figure 4-8
1
1