11
Indicator Light Description
Buzzer Description
Indicator Light Status Description
Restore factory settings or startup (when it is turned
o)
Quick blinking
of blue light
The Curtain Driver is connecting with the hub
(Aer the device is started for use for the first
time or reset).
Firmware updating is in progress.
Turn o the device
Touch & hold for 10
seconds
Slow blinking of
orange light
Device opening range deleted.
Factory settings restored.
Device searching reaction.
Opening and closing directions switched.
Range limit point was set successfully.
DescriptionBuzzer Status
1 Long beep
3 Short beeps
When the range of Curtain Driver is not
deleted, set the limit point of stroke manually.
When the range of Curtain Driver stroke is
deleted, delete the range again.
The curtain driver is held in place.
The curtain driver is released in place.
Warning of low battery.
2 Short beeps
Holding to the rail is in progress.
Releasing from the rail is in progress.
Green blinking
The device is being charged.
Charging is complete and the adapter is not
removed.
White blinking
Quick blinking of
green light
Steady blinking of
White light
Touch & hold for 5
seconds
To Next Page
Loading...