03
Installation Requirements
Rail Types
The Smart Curtain Driver E1 (Track Version) be used on U-rails and I-rails.
Installation Requirements of U-Rail
The bottom surface of the U-rail should be flat and smooth.
Installation Requirements of I-Rail
The bottom surface of the I-rail should be flat and smooth, with a width
greater than 10mm.
Width > 10 mm
Both sides of the rail should be sealed tightly with closure heads.
If you would like to use the product on rods, please purchase the Curtain
Driver E1 Rod Version.
U-shaped rails I-shaped rails
To Next Page
Loading...