04
Installation Requirements of Curtain Track Glider
The distance from the upper surface of the bottom of glider hanging ring
to the bottom of the rail should be between 16 mm and 25 mm.
Straight and Special-Shaped Rails
For U-rail and I-rails, the Curtain Driver E1 supports straight and curved
rails. For curved rails, the following conditions should be met around the
bend:
1.This product needs to be connected with the Aqara Home app before
being installed on the curtains.
Before activating the product, please make sure you have the Aqara
Quick Start Guide
Preparation before use
Please read the following steps to start using the product.
U-Rail Glider I-Rail Glider
16~25mm 16~25mm
Top view
Curved rail
Wall
Bend of rail
≥25cm
To Next Page
Loading...