aqprox! appLS21 - Prefix and Suffix Configuration; Single Byte Prefix;Suffix Addition; Multiple Byte Prefix;Suffix Addition; Clear All Prefixes

16
Add Prefix / Suffix (up to 10 characters can be added respectively)
Add prefix process:
Example 1: add a byte prefix, the character is “”, and the corresponding
ASCII decimal number is 040.
1. Scan “enter / exit programming mode” barcode.
2. Scan “configuration the 1st prefix“ barcode.
3. Scan digital barcodes “0”, “4”, “0”
4. Scan “enter / exit programming mode” barcode.
Add suffix process:
Example 2: add a suffix of byte, the character is “)”, and the correspon-
ding ASCII decimal number is 041.
1. Scan “enter / exit programming mode” to put the device into program-
ming mode.
2. Scan “configuration suffix 1st byte”.
3. Scan bytecode values “0”, “4”, “1” in turn.
4. Scan “enter / exit programming mode”.
Add multiple byte prefix:
Example 3, add multiple byte prefixes
1. Scan “enter / exit programming mode” to put the device into program-
ming mode.
2. Scan “configuration prefix 1st byte”.
3. Scan the first byte code value in turn.
4. Scan “configuration prefix 2nd byte”.
5. Scan the second byte code value in turn.
6. Repeat steps 4 and 5
7. Scan “enter / exit programming mode”.
Add multiple byte suffix:
Similar to adding multiple prefixes.
Clear all prefixes:
Scan the clear all prefixes barcode.