Step 1: Press the WPS button of the Router directly for 2 ă 3 seconds
or Click web management interface ÂStart PBCÊ.
Step 2: Press the WPS button of the Adapter directly for 3 seconds.
Step 3: Wait for a while until the next screen appears. Click Finish to
complete the WPS configuration.
5.8 Router Administrator Setup
Factory Default and Settings Backup , Restore
You can backup all Setting of this router to a file, so you can make
several copied of router configuration for security reason. To backup or
restore router setting, please follow the following instructions:
Please click click
ÂManagement-> Save/Reload
settingÊ located at the web
management interface, then the
following message will be
displayed on your web browser:
Save Settings
Press ÂSave⁄Ê button, and youÊll be prompted to
download the configuration as a file, you can
please save it as another filename for different
versions, and keep it in a safe place.
Load Settings Press ÂBrowse⁄Ê to pick a previously-saved
configuration file from your computer, and then
click ÂUpload⁄Ê to transfer the configuration file to
router. After the configuration is uploaded, the
To Next Page
Loading...