To Next PageTo Next Page
Need help?Do you have a question about the Aqua Computer ULTITUBE D5 PRO and is the answer not in the manual?
General| Manufacturer | Aqua Computer |
|---|---|
| Type | Reservoir with Pump |
| Pump Type | D5 |
| Reservoir Material | Acrylic |
| Pump Material | Plastic |
| Capacity | 150 ml |
| Power Consumption | 23 W |
| Voltage | 12 V |
| Max Flow Rate | 1500 L/h |
| Max Head Pressure | 3.9 m |
| LED Lighting | RGB |
| Ports | G1/4" |
| Compatibility | Standard PC Water Cooling |
| Connector | 4-Pin Molex |
Instructions for installing a D5 pump motor into the ULTITUBE base part.
Guidance on mounting the reservoir within a PC case for stability.
Details on installing an optional RGBpx LED ring for reservoir illumination.
Procedure for removing and refitting the reservoir lid for filling purposes.
Instructions for connecting the reservoir to the PC's liquid cooling loop.
Information on removing and reattaching the D5 NEXT pump's controller unit.
Details on connecting power, USB for communication, and fan/flow sensor connectors.
Connecting to Aqua Computer devices or RGBpx products via the bus connector.
Specifications for the D5 NEXT pump, including voltage, power, and temperature limits.
Restoring factory defaults and obtaining the aquasuite software for D5 NEXT pumps.
Connecting the D5 PWM pump to the PC's power supply and fan header.
Technical specifications for the D5 PWM pump, including voltage, current, and temperature ranges.
General technical specifications of the ULTITUBE reservoir, including capacity and thread size.
Instructions on how to clean the reservoir using a soft cloth, avoiding electronic parts.
Information on proper disposal and contact details for Aqua Computer customer support.
