Why is my AQUA FORTE M30 not charging?
There could be several reasons why your AQUA FORTE Swimming Pool Vacuum isn't charging. It could be due to debris on the charging head electrode, so try cleaning it. Alternatively, ensure the bottom magnetic cap is removed. If those aren't the issue, the charging kit might be damaged and need replacement.
What to do if my AQUA FORTE M30 Swimming Pool Vacuum is not moving or pumping?
If your AQUA FORTE Swimming Pool Vacuum isn't moving or pumping, there are a few things to check. First, ensure the robot is fully charged. Second, make sure the robot is under water and the indicator lights are on. Also, verify that you pressed the on/off button after the settings are done and before putting the robot into the water, and ensure the indicator lights are on. Finally, examine the filter basket and clean it if it's full.
How to fix AQUA FORTE M30 that won't switch on?
If your AQUA FORTE Swimming Pool Vacuum isn't switching on, make sure that the magnetic cap is removed. Also, ensure that the display and your hands are dry. If that doesn't work, hold the power button for 3 seconds. Finally, ensure the battery is fully charged.
Why is my AQUA FORTE M30 Swimming Pool Vacuum's cleaning capability poor?
Several factors can affect the cleaning performance of your AQUA FORTE Swimming Pool Vacuum. Check if the battery is low and fully charge the robot. Inspect the impeller for obstructions like debris or hair in the guide ring. Clean the filter basket if it's full. Take out the filter basket and ensure the water inlet is not blocked. Finally, the scrubber or filter basket might be damaged and need replacement.
What if my AQUA FORTE M30 is moving but not pumping?
If your AQUA FORTE Swimming Pool Vacuum is moving but not pumping, check the impeller for obstructions. Too much debris in the guide ring can affect its rotation. (Please insert back the magnetic cap before operation, to avoid injuries caused by the impeller rotation). Also, ensure that the filter basket isn't full and clean it if necessary. Take out of filter basket and clean water inlet. Finally, ensure the battery is fully charged.
Why is my AQUA FORTE M30 Swimming Pool Vacuum not moving?
If your AQUA FORTE Swimming Pool Vacuum isn't moving, check if the track is deviated and stuck, and roll it forward and backward to restore it. The track might be damaged and need replacement. Clean the scrubber if it gets stuck. Remove any obstacles that might be blocking the robot and restart it. Finally, clean the filter basket if it's full.
Why is my AQUA FORTE M30 not climbing?
If your AQUA FORTE Swimming Pool Vacuum isn't climbing, check if it's in under floor cleaning mode and turn to overall cleaning mode. Inspect the impeller for obstructions. Clean the filter basket if it's full. Also, take out the filter basket and clean the water inlet.
What causes unusual non-stop behavior in my AQUA FORTE M30 Swimming Pool Vacuum?
If your AQUA FORTE Swimming Pool Vacuum is behaving unusually and running non-stop, it might be due to a software failure. To resolve this, insert the magnetic cap back for 5 seconds, then remove it and restart the device.
Guide on optimal robot placement for thorough pool coverage.
Instructions for draining water by placing the robot on the pool edge.
Step-by-step visual guide to accessing and opening the robot's filter box.
Essential safety precautions and usage guidelines for the robot.
Specific safety advice related to operating and charging the robot.
Specifies environmental and water parameters for optimal robot performance.
Important safety considerations during handling and maintenance of the robot.
Key points to remember regarding robot performance and storage.
Lists all items included in the robot's packaging for user verification.
Details the robot's performance metrics, dimensions, and operational parameters.
Steps required to set up and prepare the robot for its first use.
Explanation of buttons, icons, and their functions on the robot's control interface.
Instructions on how to start, use, and manage the robot's functions.
Procedure for removing and cleaning the robot's filter basket after use.
Steps for connecting the charger and safely recharging the robot's battery.
Guide to connecting the robot to a Wi-Fi network for app control.
Guidelines for regular cleaning and upkeep of the robot's filter.
Instructions for inspecting and cleaning the robot's impeller.
Step-by-step guide on how to remove and install new brushes on the robot.
Instructions for removing old tracks and fitting new ones onto the robot.
Addresses issues related to the robot not charging correctly or failing to connect.
Solutions for problems encountered when trying to turn the robot on.
Diagnoses and fixes for when the robot fails to move or pump.
Troubleshooting steps for when the robot moves but does not pump water.
Solutions for when the robot pumps but fails to move.
Addresses issues where the robot fails to climb pool walls or surfaces.
Identifies causes and solutions for reduced cleaning performance.
Explains how to resolve unexpected stopping or continuous cycling issues.
Interprets error codes displayed by the robot and suggests corrective actions.
Guidelines for operating the power supply indoors.
Instructions for the proper disposal and recycling of the robot's battery.
Conditions under which the product warranty may be voided.
General| Pool Type | In-ground |
|---|---|
| Type | Robotic |
| Power Source | Electric |
| Warranty | 2 years |
| Cable Length | 18m |
| Filtration | Fine |
| Cleaning Area | Up to 50 sqm |
To Next Page
