Aqua Guard SandMaster SM19152S User Manual

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

aquaguardpoolsystems.com

SandMaster

Filter System

Owner’s Manual

Installation, Operation and Service

Models: SM16102S, SM16102STL

SM19152S, SM19152STL

Notice to Installer

This manual contains important information about the installation, operation and safe use

of this product. Once installation is complete, this manual must be given to the owner/

operator of this equipment.

This equipment must be installed and serviced by a qualied

technician in accordance with all applicable codes and

ordinances. Improper installation can create hazards which could

result in property damage, serious injury or death. Improper

installation will void the warranty.

The NOTICE label indicates special instructions that are

important but not related to hazards.

WARNING

Table of Contents

Questions and Answers:

M
Michael BradyAug 9, 2025
Why is the water from my Aqua Guard Water Filtration Systems dirty?
- P
  Peter SuttonAug 9, 2025
  Dirty water in your Aqua Guard Water Filtration System can stem from several issues. It could be insufficient filtration time, a heavy load of contaminants, or a dirty filter needing backwashing. Other potential causes include air leaks on suction, blocked pump impeller vanes, insufficient water supply, an unprimed pump, incorrect water chemistry, or excessive water flow for the filter size. Foreign matter or debris forced through the filter bed and under drain, other restrictions including pool suction cleaners, or clogged filter media may also be responsible. Operating the filter on recirculate will help determine if the restriction is in the filter. Backwashing or regeneration may be needed; refer to the maintenance section.
S
sylviaburtonAug 17, 2025
Why filter media returning to Swimming Pool/ Spa from Aqua Guard SandMaster SM19152S Water Filtration Systems?
- O
  ocurtisAug 18, 2025
  Filter media returning to your Swimming Pool/Spa from Aqua Guard Water Filtration Systems can occur due to several reasons: the filter is on recirculate, damage to the under-drain laterals, damage or incorrect fit of Multi-Port Valve, or incorrect or mixed grades of media in the filter. First, verify that the media is actually coming from the filter and not another source.

Aqua Guard SandMaster SM19152S Specifications

General

Brand	Aqua Guard
Model	SandMaster SM19152S
Category	Water Filtration Systems
Language	English

Related product manuals

Aqua Guard SandMaster SM16102S