To Next PageTo Next Page
Need help?Do you have a question about the Aqua Logic AQL-PS-8 and is the answer not in the manual?
Details on how Aqua Logic automates pool equipment control, including pumps, valves, heaters, and chlorination.
Explains the default screen displays and how to navigate them on the Aqua Logic control.
How to assign descriptive names to equipment outputs for easier operation and identification.
Instructions for manually operating the pool filter pump, including single and dual speed models.
Manual operation of lights and auxiliary outputs, including standard and dimmer relays.
How to manually control pool and spa valves for different system configurations.
Manual control of heaters, switching between forced off and automatic thermostat control.
How to turn the system off or enter service mode for maintenance and troubleshooting.
Guide to using the keypad buttons for programming various functions and navigating menus.
Setting desired temperatures for spa and pool heaters, including off states.
Adjusting desired temperatures for spa and pool solar heaters.
Configuring super chlorination and the output level for spa chlorination.
Setting pool chlorinator output level and configuring day, time, display light, and beeper.
Procedure for teaching and configuring wireless remotes with the Aqua Logic system.
Overview of setting up timeclocks and countdown timers for automatic equipment operation.
Programming timeclocks for pool filter pump (1-speed and 2-speed) operations.
Setting timeclocks for spa operation, including automatic valve and heater control.
Programming timeclocks and countdown timers for pool and spa lights.
Programming timeclocks for spa filter pump (1-speed and 2-speed) operations.
Setting timeclocks and countdown timers for auxiliary outputs like Aux1.
Programming timeclocks for valves and setting the duration for super chlorination.
Defining and configuring group functions to control multiple operations with a single button.
Enabling/disabling the chlorinator, setting display preferences, and selecting cell type.
Configuring salt display options and selecting the correct electrolytic cell type (T-CELL-5 or T-CELL-15).
Configuring pool/spa modes, heater assignments, and spa countdown timers.
Setting up spa spillover modes and defining filter operation logic.
Configuring filter pump settings, naming, speed, flow monitoring, and freeze protection.
Enabling freeze protection and flow monitoring for pump and system safety.
Configuring heater enable, naming, cooldown, extend, and speed settings.
Setting the ambient temperature threshold for activating freeze protection.
Enabling solar control, solar extend, and solar priority for efficient heating.
Configuring heater extend logic and allowing low speed operation when the heater is on.
Configuring lights name, function type, relay, interlock, group, and freeze protection.
Configuring spa filter pump speed and freeze protection settings.
Configuring Aux output names, functions, relay types, interlocks, groups, and freeze protection.
Configuring virtual auxiliary outputs for PS-8-V and PS-16-V models.
Configuring valve names, functions, interlocks, groups, and freeze protection.
Mapping buttons and setting up spa side remotes (6 Button and Digital).
Enabling or disabling remote access to settings menus for security.
Configuring timeclock options (7-day vs. weekend/weekday), time format, and units (°F/PPM vs. °C/g/L).
Procedures for resetting configuration parameters to factory defaults.
Step-by-step instructions for manually operating the spa, including pump and heater control.
How to program and operate the spa automatically using timeclocks.
Adjusting the desired temperature for pool or spa heaters.
Adjusting the chlorinator output level for pool and spa sanitization.
Instructions for activating and deactivating the super chlorination function.
Steps for programming timeclocks for various equipment operations.
How to set up and use countdown timers for specific functions.
Recommended water chemistry levels for pools, including salt and stabilizer.
How to determine and maintain the saturation index for water balance.
Determining and adding the correct salt level for optimal chlorinator performance.
Guidelines on the type of salt to use and the procedure for adding it to the pool.
Using service and service-timed modes to control equipment and diagnose issues.
Understanding the 'Check System' LED alerts and their causes.
Accessing and navigating the diagnostic menu for detailed system information.
Interpreting instant salt readings, flow switch status, and sensor data.
Checking software revisions for the main unit and connected devices.
Details on how Aqua Logic automates pool equipment control, including pumps, valves, heaters, and chlorination.
Explains the default screen displays and how to navigate them on the Aqua Logic control.
How to assign descriptive names to equipment outputs for easier operation and identification.
Instructions for manually operating the pool filter pump, including single and dual speed models.
Manual operation of lights and auxiliary outputs, including standard and dimmer relays.
How to manually control pool and spa valves for different system configurations.
Manual control of heaters, switching between forced off and automatic thermostat control.
How to turn the system off or enter service mode for maintenance and troubleshooting.
Guide to using the keypad buttons for programming various functions and navigating menus.
Setting desired temperatures for spa and pool heaters, including off states.
Adjusting desired temperatures for spa and pool solar heaters.
Configuring super chlorination and the output level for spa chlorination.
Setting pool chlorinator output level and configuring day, time, display light, and beeper.
Procedure for teaching and configuring wireless remotes with the Aqua Logic system.
Overview of setting up timeclocks and countdown timers for automatic equipment operation.
Programming timeclocks for pool filter pump (1-speed and 2-speed) operations.
Setting timeclocks for spa operation, including automatic valve and heater control.
Programming timeclocks and countdown timers for pool and spa lights.
Programming timeclocks for spa filter pump (1-speed and 2-speed) operations.
Setting timeclocks and countdown timers for auxiliary outputs like Aux1.
Programming timeclocks for valves and setting the duration for super chlorination.
Defining and configuring group functions to control multiple operations with a single button.
Enabling/disabling the chlorinator, setting display preferences, and selecting cell type.
Configuring salt display options and selecting the correct electrolytic cell type (T-CELL-5 or T-CELL-15).
Configuring pool/spa modes, heater assignments, and spa countdown timers.
Setting up spa spillover modes and defining filter operation logic.
Configuring filter pump settings, naming, speed, flow monitoring, and freeze protection.
Enabling freeze protection and flow monitoring for pump and system safety.
Configuring heater enable, naming, cooldown, extend, and speed settings.
Setting the ambient temperature threshold for activating freeze protection.
Enabling solar control, solar extend, and solar priority for efficient heating.
Configuring heater extend logic and allowing low speed operation when the heater is on.
Configuring lights name, function type, relay, interlock, group, and freeze protection.
Configuring spa filter pump speed and freeze protection settings.
Configuring Aux output names, functions, relay types, interlocks, groups, and freeze protection.
Configuring virtual auxiliary outputs for PS-8-V and PS-16-V models.
Configuring valve names, functions, interlocks, groups, and freeze protection.
Mapping buttons and setting up spa side remotes (6 Button and Digital).
Enabling or disabling remote access to settings menus for security.
Configuring timeclock options (7-day vs. weekend/weekday), time format, and units (°F/PPM vs. °C/g/L).
Procedures for resetting configuration parameters to factory defaults.
Step-by-step instructions for manually operating the spa, including pump and heater control.
How to program and operate the spa automatically using timeclocks.
Adjusting the desired temperature for pool or spa heaters.
Adjusting the chlorinator output level for pool and spa sanitization.
Instructions for activating and deactivating the super chlorination function.
Steps for programming timeclocks for various equipment operations.
How to set up and use countdown timers for specific functions.
Recommended water chemistry levels for pools, including salt and stabilizer.
How to determine and maintain the saturation index for water balance.
Determining and adding the correct salt level for optimal chlorinator performance.
Guidelines on the type of salt to use and the procedure for adding it to the pool.
Using service and service-timed modes to control equipment and diagnose issues.
Understanding the 'Check System' LED alerts and their causes.
Accessing and navigating the diagnostic menu for detailed system information.
Interpreting instant salt readings, flow switch status, and sensor data.
Checking software revisions for the main unit and connected devices.
General| Brand | Aqua Logic |
|---|---|
| Model | AQL-PS-8 |
| Category | Swimming Pool Vacuum |
| Language | English |
