Aqua Logic DCS-TI User Manual (English)

To Next Page

©Aqua Logic, Inc. 2017

Page 1 of 5

Aqua Logic, Inc

9558 Camino Ruiz.

San Diego, CA 92126

PH: 858.292.4773 Fax: 858.292.0537

Email: info@aqualogicinc.com

Website: www.aqualogicinc.com

DC SERIES SINGLE STAGE DIGITAL TEMPERATURE CONTROL INSTRUCTION MANUAL

Model No. DCS-TI

Thank you for purchasing our digital temperature controller. It is designed to provide on/off control for

commercial heating and cooling applications. It is equipped with a red LED display that provides a

constant readout of the water temperature, and a touch keypad that allows the user to easily and

accurately select the setpoint temperature and differential. The control enclosure has an NEMA 4X

rating but, if installed outdoors, it should be protected against the direct weather.

Need help?

Do you have a question about the Aqua Logic DCS-TI and is the answer not in the manual?

Aqua Logic DCS-TI Specifications

General

Model	DCS-TI
Control Algorithm	PID, On/Off
Type	Temperature Controller
Input Type	Thermocouple, RTD, Analog
Control Output	Relay, SSR, Analog
Display	LED
Power Supply	100-240V AC, 24V DC
Communication	RS485 (Modbus RTU)

Summary

Installation and Setup

Temperature Controller Set-up

Guide to setting the desired temperature point for the controller operation.

Temperature Differential

Explanation of the temperature difference for on/off cycles.

Display Calibration and Program Parameters

Procedure for adjusting display readings and programming controller settings.

Programmable Parameters Table

Operation in Case of Error

Error Messages

Details on error messages and how to quit alarms.

Specifications and Power Rating

Controller Power Rating

Details on the electrical power input and output ratings for the controller.

Aqua Logic DCS-TI User Manual