Aqua Medic reactor 1000 User Manual

CO2 reactor >>reactor 1000<<
______________________________________________________________________
The CO2-reactor 1000 has been developed for the fertilisation of freshwater and marine
aquaria Carbondioxide.
The unit has been especially designed for external use, outside of the aquarium.
Read and follow asll instructions in this leaflet carefully . The CO2-reactor will thank this
with a safe function and a trouble-free long life.
1. parts of the reactor
fig1: reactor 1000
1. reactor – housing, filled with Bactoballs
2. water inlet
3. CO2 – inlet
4. false gas outlet
5. holding clamps ( 2 pcs)
6. holder for fixing at the aquarium
7. holding plate
8. Water outlet
9. 0-ring at the water inlet and outlet.
1
4
2
3
8
5
6
7
9

Aqua Medic reactor 1000 Specifications

General

Brand	Aqua Medic
Model	reactor 1000
Category	Medical Equipment
Language	English

Summary

Reactor Parts Overview

CO2 Reactor Setup and Installation

Mounting Inside Aquarium

Fixing the reactor inside the aquarium using the included holder and screws.

Mounting Outside Aquarium

Fixing the reactor outside the aquarium cabinet or on a wall using the holding plate.

CO2 Reactor Appliance and Setting

Water Hardness and CO2 Management

Increasing Carbonate Hardness

Guidance on increasing carbonate hardness when levels are too low for stable pH.

CO2 Quantity and Carbonate Hardness

Explains the relationship between CO2, pH, and carbonate hardness for plant and fish health.

Product Guarantee