EasyManua.ls Logo

Aqua PRO SINGLE SPEED User Manual

Aqua PRO SINGLE SPEED
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
-
1 -
QUICK START QUIDE
OWNER’S MANUAL
INSTALLATION, OPERATION & PARTS
POOL PUMPS
SINGLE SPEED & 2-SPEED
This equipment must be installed and serviced by a qualified technician in accordance with all applicable codes
and ordinances. Improper installation can create hazards which could result in property damage, serious injury
or death. Improper installation will void the warranty.
The NOTICE label indicates special instructions that are important but not related to hazards.
Notice to Installer
This manual contains important information about the installation, operation and
safe use of this product. Once installation is complete, this manual must be
given to the owner/ operator of this equipment.
WARNING
Question and Answer IconNeed help?

Do you have a question about the Aqua PRO SINGLE SPEED and is the answer not in the manual?

Aqua PRO SINGLE SPEED Specifications

General IconGeneral
Horsepower1.5 HP
Voltage115/230V
SpeedSingle Speed
Motor Housing MaterialAluminum
Wet End MaterialThermoplastic

Summary

Pool Pump Installation and Operation Guide

Quick Start Guide and Owner's Manual

Provides installation, operation, and parts information for single and 2-speed pool pumps.

Important Safety Warnings

Highlights critical safety information, installation hazards, and specific warnings for safe use.

Notice to Installer

Informs installers about the manual's importance and content for the owner.

Pump Installation and Safety Details

Product Description and Unpacking

Describes the self-priming pool pump and outlines unpacking inspection procedures.

Installation Requirements

Details requirements for qualified personnel, pump location, ventilation, and mounting.

Important Safety Instructions

Lists fundamental safety precautions to reduce the risk of injury and ensure proper operation.

Plumbing and Suction Requirements

Threaded Connections and Plumbing

Guidance on threaded connections, pipe sizing, and plumbing layout for optimal performance.

Pool Pump Suction Requirements

Addresses suction hazards, entrapment protection, outlet cover requirements, and testing.

Electrical Connections and Safety

Electrical Grounding and Bonding

Details proper grounding, bonding procedures, and wiring requirements for safety.

Wiring Guidelines

Provides instructions on following national and local wiring codes for pump connection.

Pump Operation and Maintenance

Pump Operation Procedures

Instructions on safe operation, including priming, avoiding dry running, and handling.

Routine Maintenance

Details the inspection and cleaning of the trap basket as the primary maintenance task.

Pump Troubleshooting and Winterizing

Pump Service Troubleshooting Guide

Addresses common issues like failure to pump, reduced capacity, and electrical problems.

Draining, Storage, and Winterizing

Covers procedures for draining the pump, storage, and winterizing to prevent damage.

Mechanical Issues and Warranty

Mechanical Troubles and Noise

Addresses issues related to piping support, pump mounting, and potential noise sources.

Limited Warranty Information

Outlines the one-year limited warranty, coverage, exclusions, and claim procedures.